What common problems should I pay attention to when using the cooling fan?

For manufacturers familiar with cooling fan production, the fan in the machine room is like the temperature of sauna. However, if the machine temperature is too high, it will conduct heat, which will lead to machine failure, and cause machine failure and restart. This will have a negative impact on the operation of the mining machine. When the time is long, it will also cause irreversible losses, which will greatly consume the life of the mining machine. Therefore, it is necessary to heat the mining machine. The effective method now is to use a heater to dissipate the heat stored in the machine and keep the operating temperature of the machine in a normal state.

So, what should we pay attention to about the radiator used by the machine? In view of the high temperature and long service life of the machine tool, the following three points should be guaranteed.

1. The volume and pressure of cooling air shall be large enough. Even if the noise is very loud, the heat should be dissipated basically, because the temperature of the machine is too high, problems will occur.

2. The quality of the cooling fan must be qualified. It is not allowed that the cooling fan does not work because it works in high temperature and dusty environment for a long time.

3. Speed regulation function: when the machine temperature rises, the radiator speed will automatically speed up, otherwise, the speed will slow down. It can not only prolong the service life, but also improve the comfort.

DC fan, EC fan, CPU heat sink